Gamut Mapping choices in ProfileMaker 5.02

теоретические и практические аспекты колориметрии, системы управления цветом
Ответить
rybafish
Сообщения: 9
Зарегистрирован: 01 мар 2005, 13:10
Откуда: Москва

Gamut Mapping choices in ProfileMaker 5.02

Сообщение rybafish »

>From Profiler Maker 5 documentation:

"....These Gamut Mapping variants are reflected in all four Rendering
Intents. But they are most noticeable in the perceptual (photographic)
and saturation Rendering Intents".

Кто наблюдал разницу?

Сергей
rybafish
Сообщения: 9
Зарегистрирован: 01 мар 2005, 13:10
Откуда: Москва

Мнения забугорных пользователей PM5 по этой теме

Сообщение rybafish »

______________________________________________________
1. Here is a rule of thumb of how I would apply the various gamut mappings
in PM5, for the perceptual intent:

- If you just want the most pleasing output, pick COLORFUL

- If you care about hue, for example if you don't want your satured
yellowish red to turn into a bluish red, or your saturated greenish
yellow to turn into a reddish yellow, then pick either CHROMAPLUS or
CLASSIC
- if your output gamut is small (newspaper prints) or just unusual,
pick CLASSIC
- otherwise pick CHROMAPLUS

___________________________________________________________

2.

1) Classic bases the max primaries off of a linearized balance, thus
reducing potential saturation of a heavy primary.

2) Chroma Plus was introduced to help hit a better saturated green
(c+y), which might be native to both ink jet and photo printers not
using ICC

3) Colorful was added when the Chroma Plus seemed a bit extreme for
pastels, skin tones and a few other memory colors.
Ответить

Вернуться в «Колориметрия - наука о цвете: теория и практика»